Saturday, August 19, 2006

Kitchen Makeover: Part II

kitchen before

Elizabeth and I have done a lot of work on our kitchen. Like I said in Part I, we really didn't like the kitchen when we moved in so we started making changes immediately. However, there was some fairly significant design changes to make, so we started off slow (again, see Part I). I am now going to start talking about the major changes. Unfortunately, we did not document the work very well in pictures but at least you can see the results. As a reminder, I've put in a before pic.

undercabinet light

The first thing E and I did was refinish all of the cabinets, doors, and drawers. We wanted them to be darker than they were so we just did a light sanding job and then put a couple of coats of a darker stain on. Next, Elizabeth's dad, Kim, helped me to tear out the old countertops, all of the old tile, and the drywall that was behind the tile. He and I then reinforced some of the joinery in the wall with some 2x4 and installed some undercounter lighting that I rewired with appropriate wire so that I could run it through the wall and connect it to the existing switch for the sink light. Lastly, we installed tile backerboard for the new tile that would be installed.

E and I then had Silestone countertops put in along with a new sink, faucet, and cooktop we had purchased. Of course, I then had to figure out how to adjust the plumbing to work with the new sink layout and I had to hook the new cooktop up to the gas line that we had run. We also had a professional do the electric conversion from a hardwired 240V to a 120V plug for the new cooktop. Here are some pictures of the work and results and there are more in the House Album.

new sinkplumbing
new cooktopcooktop hookup
kitchen in work

Friday, August 18, 2006

Reindeer

Sorry it's been so long since I posted. I'm sure there are hundreds of people that have been disappointed when they checked in every day. ;-) Anyway, the next project that E had me do was some reindeer for Christmas decorations.

reindeer

One of her coworkers has some like these and she stole the idea from her. These were pretty simple to make. I just used the jig saw to cut out the patterns and then sanded and we painted them. The only trick is that the fronts are covered in glitter as well as paint. If I remember right, we used spray paint until they were sufficiently covered and then rolled on one coat and while it was wet, sprinkled on the glitter.

By the way, I have finally started working on my next project. It is a built-in desk for the nook in the kitchen. I'll be posting the work E and I did in the kitchen pretty soon so you'll be able to see the nook then.

Wednesday, August 09, 2006

Finished Coffee Table

The coffee table assembly was not particularly difficult. I just cut the wood down to size and rounded the corners slightly. I then used a drill press to drill the appropriate holes. Of course, hole placement is very important so I used a jig to help with that.

I bought the 1/4" polished aluminum from a metal place on I-45 but I had to buy a 12 foot piece and cut it down. I used a hack saw which was a nice workout. Of course, I then assembled the piece and stained it but I couldn't get the stain off of the aluminum so I had to cut four more pieces to replace the ruined ones. Oh well, lesson learned and the finished product looks great.

ottomanottoman